How to Take Apart a Scorch Torch

how to take apart a scorch torch

A scorch torch is a key component of many dab setups, as it heats up the end of your dab nail or nectar collector tip so that it can reach a high enough temperature to flash-vaporize concentrates.

Unlike traditional lighters that use gas-based lighter fluid, scorch torches use butane. They can last forever if you take good care of them.

How to Disassemble a Scorch Torch

A scorch torch is a must-have accessory for most dabbing setups. It allows you to heat up your dab nail or nectar collector tip so that it can reach the right temperature to flash-vaporize your concentrates. It is very important that you take care of your torch so that it lasts a long time and doesn’t break easily.

All torches eventually run out of fuel, so it is vital that you refill your torch from time to time. It is recommended that you use triple refined butane to refill your torch, as it will give you a cleaner and more efficient flame.

Once your torch has been filled, it is important that you let it sit for a few minutes before you begin using it. This is to ensure that the butane has a chance to cool down inside your torch and get ready for use.

Once you are ready to relight your torch, you will need to locate its refill nozzle and flame adjustment screw. You will also need a can of butane fuel made for a scorch torch, which you can find almost anywhere torches are sold. It is important to follow the instructions on your can of fuel so that you don’t damage the inside of your torch or cause any further problems.


A scorch torch is a type of lighter that uses butane to produce a high-temperature flame. These torches are a necessary accessory for any dabbing setup, as they help heat up your dab nail or nectar collector tip to the right temperature so that your concentrates can flash-vaporize.

The parts needed to take apart a scorch torch include the refill nozzle, flame adjustment screw and a butane fuel can. The nozzle is the largest part of your torch, and it allows you to fill your fuel can without spilling any of the fluid inside. The flame adjustment screw is the smaller part of your torch and it controls the flow of the butane. The most important thing to know about the smaller part of your torch is that you should not shake or squeeze it, because this can cause the butane to break down and cause leaks.

The best way to disassemble your scorch torch is to follow the instructions in the owner’s manual and use the right tools for the job. This will help ensure that you do not damage your expensive accessory.


When disassembling a scorch torch, be sure to take proper safety measures. Avoid touching anything that could be flammable, such as the burner head, and work in a well-ventilated area. Keep a white fine cloth nearby to wipe away any residue or splatter that may be left on the burner head and body.

You can use a scorch torch to heat up stubborn fasteners, such as nuts and bolts, to make them easier to turn with a wrench. It’s also useful for removing paint, since the flame will soften and bubble up the paint to allow it to be easily removed with a scraper.

Another fun way to use a scorch torch is to heat up wood, metal or other materials to give them a distinct look. This works especially well for giving furniture a distressed look or for creating vintage or antique textures on copper and other metals.

It can also be used to remove paint and caulk. If the surface is greasy or has a lot of caulk, run the flame over it for a few seconds to warm it up and make it easier to remove with a scraper.

The Scorch Torch Skyline is a nicely designed small torch lighter that has an adjustable flame control and a butane level window to help you monitor when it needs refilling. Though the adjustment knob presents a few design issues, it does a good job of setting the flame from low to high. It also has a manual open safety cap and the double doors at the top of the flame burner do a great job of keeping lint out of the burner assembly.


Cleaning a torch is one of the most important tasks you can do to ensure that it continues to function properly. It helps to maintain the flame strength and consistency of your lighter, as well as preventing residue from unfiltered butane that may affect performance.

To begin the process, locate the refill nozzle on your torch and the flame adjustment screw on top of it. You’ll also need a can of butane fuel made for a scorch torch, which can be found basically anywhere torches are sold.

This process can be time consuming and can take some patience, but it will help to keep your lighter in premium condition for the long haul. It will also prevent you from having to go out and purchase a new torch or lighter when yours fails.

This step is a good idea for any smoker, but it’s particularly beneficial to cigar enthusiasts. Having a clean, efficient lighter is an important part of the smoking experience, as it helps to produce the strongest and most consistent flame possible for your cigars. It also ensures that your torch is free from any contaminants that may contribute to an unpleasant odor, which can impact your enjoyment of the smoking experience.

March 5, 2023 1:49 pm