How to Take a Trampoline Apart

how to take a trampoline apart

Whether you’re moving your trampoline or simply want to clean it up, you’ll need to take it apart. This is an important step in ensuring safety and storing it properly.

Fortunately, taking apart your trampoline isn’t that difficult, if you have the right tools. To make the process easier, you’ll need to remove the spring cover first and then detach the frame and jumping mat.

Remove the Spring Cover

Removing the spring cover from your trampoline isn’t a simple task, and it can be dangerous. Without the protective padding, the metal frame of your trampoline can become sharp and the fabric covering it may rip.

When you’re removing the spring cover from your trampoline, make sure to wear gloves so that you don’t injure yourself or your children. Also, keep the kids away while you’re doing this.

To remove the trampoline’s springs, first lay it down on its side and use your hands to grasp the middle of each one. Then pull the end of each spring until it comes apart from the frame slot.

If you’re unable to take the trampoline’s springs apart using tools, there are other methods that you can try. For example, you can use a rust remover like Evapo-Rust ER012 to eliminate rust from the springs and other metal parts of your trampoline.

You can also try to get rid of rust from your springs by applying lemon paste on them. The paste can be made at home by mixing two lemons or lime juice with a half cup of salt.

After you’ve applied the lemon paste on your trampoline’s springs, leave them for at least two hours. After that, you can rinse them with water and dry them. It’s important to do this regularly so that your trampoline doesn’t start corroding and become dangerous.

Unscrew the Bolts

One of the most important things to do when taking a trampoline apart is to unscrew the bolts that are holding it in place. This can be done with a Phillip’s head screwdriver or power drill. Make sure to wear hand gloves and eye goggles to ensure safety while doing this.

Once the bolts are removed, you can begin to take the spring cover off. This is typically attached with ties that go around the springs, so you’ll want to reach underneath and untie these. Once the cover is gone, you can remove each spring individually, using a trampoline spring puller or pliers.

The next step is to detach the net poles from the top of the springs. This is a fairly simple process, as long as you’re careful not to damage the springs themselves.

This will allow you to get a better look at how they’re held together and what parts you’ll need for the rest of the process. It’s also a good idea to remove the bungees and other attachments that attach the net poles to each other.

It’s also a good idea to take a close look at the springs and mat to see if any are damaged or missing. This will help you know if it’s time to replace them. A damaged spring is a potential safety hazard, so it’s best to take care of it quickly before it can cause any serious damage to your trampoline.

Detach the Legs

Detaching the legs from a trampoline can be a bit of a pain, but it can also save you some money in the long run. Aside from saving you the hassle of paying a trampoline repairman to fix it, removing the legs can also make moving your trampoline a lot easier.

To detach the legs, you’ll need a spanner and a screwdriver. If you can afford it, a power drill will speed things up a few notches. You’ll also want a quality hand grove, or some kind of sleeve to protect your hands from the sharp edges of the metal. Depending on the model, the legs themselves may be made of different materials, so it’s important to know what you’re working with before you start.

The best way to take your trampoline apart is to start with the frame, then work your way down. There are a number of reasons for this, from reducing risk of injury to improving the longevity of your investment. Using the right tools can also help ensure you get it done right the first time.

Unscrew the Frame

You may need to take your trampoline apart for a variety of reasons, such as to make repairs or when the weather turns bad. In any case, it’s important to know how to safely do so without getting injured.

A good pair of work gloves can go a long way in protecting your hands and preventing abrasions or cuts. It’s also a good idea to wear eye protection, such as safety glasses or goggles, to avoid damaging your vision.

After you’ve removed all the screws and netting, you can start taking your trampoline apart. Depending on the model, you’ll want to remove the enclosure poles and trampoline safety net first.

Next, unscrew the frame of your trampoline. You can use a screwdriver or power drill to get the job done faster. If you’re a little more handy, you can even use a wrench to loosen the nuts and bolts that hold the frame together.

Once the frame is detached, you’ll be able to take the outer rings and T-joints apart. It’s important to twist each ring until it separates from its joint, and then to pull the rings out in order.

Once you’ve separated all of the parts, you can store them in a safe place until you’re ready to assemble the trampoline again. It’s a good idea to clean the metal pieces well before you store them, and make sure to remove any rust that has formed.

Remove the Mat

If your trampoline mat is old, you might need to replace it. Typically, trampoline mats last three to eight years depending on how well you take care of them.

When you decide to replace your mat, you’ll need work gloves and a trampoline spring pull tool. Using these tools will make the process much more efficient and prevent any unnecessary damage to your trampoline.

To begin the replacement process, you’ll need to remove any safety pads around the ring of your trampoline. These paddings are often foam-based and can be removed by pulling them off.

Once the safety pads are gone, you’ll be able to see the springs underneath. These springs provide your trampoline with its bounce, so it’s essential to keep them clean and well-maintained.

Keeping your springs clean will also extend their lifespan and help them perform better. Be sure to clean them with soapy water and a brush, or you could even spray them down with rust-protection chemicals.

Next, you’ll need to get rid of any moss or mold on the mat. To do this, use a soft bristle brush and gently scrub the mat with the brush. This will help get any debris off the pad and into the soil.

After a thorough cleaning, you’ll be ready to put the mat back on your trampoline. You can do this safely and easily, and it will give your kids a fun activity to do in the backyard.

Break Down the Frame

Disassembling a trampoline isn’t as hard as some people think, but it’s best to take it apart in the right order to avoid damage and make sure everything is firmly secured. This will also save you time in the long run, as it’s easier to put everything back together if you know exactly what went where.

To start, remove the safety enclosure poles, which are usually fastened with screws and bolts. These are often the heaviest and hardest parts of a trampoline to disassemble, so it’s important to take them out carefully.

Next, unscrew the screws holding the frame together with a Phillips head screwdriver and a power drill. This is one of the most time-consuming steps in taking a trampoline apart, so using a power drill will help speed things along.

Once you’ve removed the screws, you can begin to disassemble the frame by pulling on each of its individual parts. This can be a little tricky, so it’s best to have another person to help you.

If the trampoline has rusty components, you’ll want to take extra care while removing them. Rust can be a dangerous substance, so you should wear gloves and use protective eye goggles while working on it.

Once you’ve finished separating the frame, you can store it in a safe place until you need it again. It’s also a good idea to label each piece so you can find it again when you need it.

March 11, 2023 2:53 pm